ABB A150-M58 Скачать руководство пользователя

Страница: 23 / 184

Operation Manual / A150-M58/68

2 Safety / 2.10 Prerequisites for operation and maintenance

HZTL4041_EN

Rev.F

February 2022

2.10

Prerequisites for operation and maintenance

Responsibility of the operating company

In awareness of its responsibility, the operating company must ensure that only authorised
personnel work on the turbocharger, who:

Are versed in the general and locally applicable regulations for occupational safety and
accident prevention

Are equipped with the prescribed personal protective equipment

Have read and understood the Operation Manual

Have been instructed in the use of the turbocharger.

The safety-conscious work of the personnel and adherence to the Operation Manual must be
checked periodically.

Suitable working materials and personal protective equipment must be kept in a perfect
condition.

Only authorised personnel may remain in the vicinity of the turbocharger when the engine is
running.

Competence of personnel

The turbocharger must only be operated and serviced by trained and authorised personnel.
Basic mechanical training is a prerequisite.

Modifications to the turbocharger

Modifications to the turbocharger must be approved by Turbo Systems.

WARNING

Use original parts

Operation of the turbocharger with non-original parts can impair the safety
of the turbocharger and can cause serious damage to property and injury to
personnel.

Only use original parts from Turbo Systems.

Original parts and accessories are specially designed for Turbo Systems turbochargers.

Turbo Systems accepts no liability for any damage resulting from the use of non-original
parts and corresponding accessories.

Page

181

Содержание A150-M58

























































































































































































Результаты поиска

Содержание A150-M58

Отзывы:

Похожие инструкции для A150-M58

Бренды по названию

Популярные бренды

ABB A150-M58, Руководство по эксплуатации

Результаты поиска

Содержание A150-M58

Отзывы:

Похожие инструкции для A150-M58

Бренды по названию

Популярные бренды