![background image](http://html.mh-extra.com/html/abb/888-2/888-2_applications-manual_2897032.webp)
3.3 Software for configuring a device
General
The PROFINET internal device does not need any type of PC software to be
activated, but the connecting PLC / PROFINET controller might need a PC software
tool to configure all connection parameters used to connect to the IRC5 system.
Location of GSDML files
The provided GSDML file for the IRC5 PROFINET device is used to inform the
connecting PLC / PROFINET controller of supported connection parameters.
The GSDML file,
GSDML-V2.xx-ABB-Robotics-PNSW-Device-YYYYMMDD.xml
, for
the internal device can be obtained from the RobotStudio or the IRC5 controller.
•
In the RobotWare installation folder in RobotStudio
:
...\RobotPackages\
RobotWare_RPK_<version>\utility\service\GSDML\
•
On the IRC5 Controller
:
<SystemName>\PRODUCTS\
<RobotWare_xx.xx.xxxx>\utility\service\GSDML\
Note
Navigate to the RobotWare installation folder from the RobotStudio
Add-Ins
tab,
by right-clicking on the installed RobotWare version in the
Add-Ins
browser and
selecting
Open Package Folder
.
32
Application manual - PROFINET Controller/Device
3HAC050969-001 Revision: G
© Copyright 2015-2018 ABB. All rights reserved.
3 Software overview
3.3 Software for configuring a device
Содержание 888-2
