ABB Welcome
®
— 4 —
4
Operation
4.1
Control elements
Fig. 1: Overview of control buttons
No.
Functions
1
Bus in
2
Bus out
3
CVBS out
4
Switch on camera power supply
For details, please see
Chapter 4.4 With and without permanent power
supply.
5
Working mode
There are four modes for the camera interface. For details, please see
Chapter 4.3 Operation mode.
6
Set the address of the associated devices
7
Set the address of the camera interface
8
Operating status notification LED
-Green: ready for operation
-Orange: in setting mode
-Red: fault
9
Dip switch to switch on/off the video channel
10
Program button to enter the programming mode
11
4 video (supports CVBS signal input)