ABACUS IT-DR OMEGA, Руководство пользователя

Страница: 6 / 19

The clamp is pre-assembled to the burner tube. Without using burner sealing paste, push
the screw (bumper) to the clamp. Tighten the clamp screws.
b.)
Securing to the expanded tube (e.g. with L configuration):
Push the burner fully into the expanded tube without using sealing paste or clamp. Secure
it with three self drilling and taping screws.
Whichever method is used, always secure the burner with at least two other self
drilling and taping screws to the burner tube.
7.)
Connect the combination hangers to the chains using carabiners.
NOTE : It is practical to assemble the appliance on the floor and then lift the assembled unit
into place using a lifting machine. If this is impossible, the heater can also be suspended in
several parts.
Important: Remove the film from the reflectors before installing the appliance.
2.1
Assembly distances of ‘L’ configuration
6