ABACUS IT-DR OMEGA, Руководство пользователя

Страница: 5 / 19

3.) Next, push up the tabs (two per slots) using a screwdriver at least by 90°.
4.) Connect the reflector supports as per the instructions in Section 2.2. (Page 5).
Four reflector support are provided for the appliance IT-DR 54 / OMEGA 9U,
and two reflector support are provided for the applianceIT-DR 46 / OMEGA 6U.
Note: The reflectors expand and contract during use.
The installation method presented prevents that reflectors slide off of each other and stick together during
contraction, which would reduce their available space and could lead to the damage of the reflectors.
Always make sure that reflectors can easily move in their supports. If required, the outer edges of the reflectors
can be pushed carefully (about 15 cm before and after the support).
VERY IMPORTANT:Before installation, remove the film from the internal part of the
reflector!!!!!!!
6.)
The burner can be secured to the burner tube in two different ways:
a.)
Securing to the burner tube with a clamp (normal construction):
5