9
①
②
•
Loosen M14
①
and M8
②
bolts located on both sides of the
floodlight.
•
Elevate the floodlight to the relevant angles.
•
Tighten the M14
①
(40~45Nm) and M8
②
( 30~35Nm) bolts.
•
Tighten the glands to cables to the
torque settings below:
o M25 gland – 5Nm
o M20 gland – 3.5Nm
•
Close the driver terminal cover with
the 4 No. T20 torx bolts (torque
settings 1.6Nm)
7
8
5
6
•
Install the DC output cable with gland
①
to the
driver (gland to body torque settings 3.43Nm)
•
Install the Surge Protection Device
②
Blue
Brown
White
Black
Gray
Purple
Purple
Gray
Yellow/Green
Red
Blue
Brown
Yellow/Green
DC output
•
Connect the DC output cables to the relevant driver
terminal blocks, as shown below.
Dimming/Dali
AC input
①
②
