Scorpio 1700 Installation Instructions
FIG 2
House Wall
1205mm
FIG 3
Lift up edge of retaining Clip and insert Handset jack.
Press the clip down again to secure in place.
FIG 4
FIG 5
WARNING
In the event of mains failure during use of bath, back-up batteries will enable the bather to exit the
bath. Immediately after installation, it is vital that the bath be connected to a mains supply for at least
24 hours before initial use, to ensure the batteries are fully charged . Failure to observe this
requirement could result in the user not being able to exit the bath in the event of a mains failure.
FIG 1 (Bath must be a minimum of 25mm away from any wall or fixture, if more than 25mm add the
difference to the 98mm and the 231mm dimension below).
Ensure both end frames are perfectly vertical
- Please use a spirit level.
1235mm
200
400
485
158
231 98
11
FIG 1
