ABACO DVL480, Руководство по эксплуатации

Страница: 6 / 20

IV. INSTRUCTION FOR USE:
1. Before Operations:
Caution:
- Make sure the battery is fully charged before using the lifter.
- Check the suction cups are free from damage. If it was damaged,
make sure to replace it with a new suction cup.
- Check there is no leakage of vacuum pressure.
- Make sure the glass surface and suction cups are clean and free
from dust.
- Ensure buttons, pressure and voltage indicators functionally all
right and operate well.
- Run idle smoothly without any noise.
2. During Operations:
Caution:
- Always pay attention to alarm signal caused by such as pressure
and voltage gauges (battery voltage shall be around 13VDC when
fully charged and lower side shall be around 11VDC)
- Stop working immediately when detected abnormal phenomena
such as; noise, vacuum leakage, deformation of any parts, and so on.
- Ensure maximum safety in the working area to avoid accidents
when moving or lifting glass sheets.
3. After Operations:
Caution:
- Lock all the safety locks and valves when not in use.
- Store the suction cups in a cool and not humid place.
- When storing, avoid distortion and deformation of any part of the
lifter.
5