Solares
TM
Smart Spa Installation Manual
CD0037
-3-
1121
Plumbing and Electrical Codes
All states and municipalities may differ extensively in their plumbing and electrical
codes. Therefore, it is Apollo Corporation’s recommendation that you check with
the proper enforcement agencies in your area before installation.
All Apollo bathing systems are manufactured with built-in backflow prevention.
However, due to different plumbing codes, it is advisable that you ask your installer
whether there is a need to install additional backflow prevention valves (such as
RPZ valves) on any new construction.
NOTE
•
Lock Out or Tag Out electrical circuit for bathing system
BEFORE
installation.
•
Electrical Protection: Class 1 Type B applied part.
•
Bathing system installation must comply with all applicable building
and health codes and regulations.
•
It is recommended that hot water not greater than 120°F (49°C) be
delivered to the bathing system.
