AB Quality 2706-P4 Series, Руководство по установке

Страница: 15 / 125

Publication 2706-IN006E-EN-P
14 InView Marquee Message Display
2. Feed electrical cable through 1” water-tight conduit, the outside
end of the connector (supplied), the electrical opening in the
sign case, and then through the inside end of the connector.
Screw the inside and outside ends of the connector together
until water-tight.
3. Strip the electrical wires back 1/4”. Connect the wires by screwing the
end of each wire into the power connection.
Quarter-turn latches
on an 2706-P74 sign
Front view,
closed
Front view, open
Power
connection
Serial
connection
Power supply
Power line
filter
Serial
device
opening
Electrical
opening
Right-end
view
Electrical opening
Front view
Sign case,
inside
Conduit
Connector,
outside end
Connector nut, with teeth
facing the sign case
Rubber gasket