Page 10
Wireless Client Mode
1.
Choose
Wireless > Basic Settings
. Then you will see the “Wireless Basic Settings”
page. Choose “
Wireless Client
” from Wireless Mode, and click
Apply
to save it. Feel
free to change the other parameters to optimize your application before clicking
Apply
.
For longer transmission of the CPE, you may also use an external antenna; if
so, remember to set the antenna setting from “Internal (8 dBi)” to “External
(N-Type)” after your external antenna is successfully installed, otherwise
do
not
set to ““External (N-Type)” without physically attaching external antenna,
otherwise, damage might be caused to the device itself.
2.
Click the “
Site Survey”
button beside
Wireless Mode
. It will scan all the available
access points within coverage. Select the one you prefer to connect to, and click
Selected
to establish the connection.
Note:
