![AAXA Technologies M4 Скачать руководство пользователя страница 7](http://html.mh-extra.com/html/aaxa-technologies/m4/m4_user-manual_450505007.webp)
Getting Started
5
Powering ON the projector
Chapter 2
Powering OFF the projector
Note: The M4 Projector battery does not charge when it is in operation. For first time
operation charge the battery for 120 minutes to ensure a full charge.
1
.
Connect the power adapter to the projector and power outlet
2
. Switch the On / Off switch on the side of the projector to the “ON” position
There are two "idle" modes for the projector. "Off" and "Standby". The "Off"
mode complete turns off the projector. The "Standby" mode allows the projector
to be turned on with the remote control. The standby mode consumes a little
battery power when left in this mode.
1.
To fully power off the projector, switch the On / Off switch on the side of the projector
to the "Off" position
2.
To put the projector in "Standby" mode press the POWER button on the keypad
3.
A window will pop up asking "Do you want to power off?"
4. Press the power button again to put the projector in "Standby" mode