AAVIX AGT306, Руководство пользователя

Страница: 5 / 21

5
13. MAINTAIN TOOLS PROPERLY. ALWAYS keep tools clean and in working order.
14. CHECK FOR DAMAGED PARTS. Check for alignment of moving parts, binding, breakage,
or any other conditions that may affect the tool’s operation. Any part that is damaged should be
properly repaired or replaced before use.
SPECIFIC SAFETY RULES FOR LOG SPLITTER
1. IF YOU ARE NOT thoroughly familiar with the operation of the log splitter, obtain
instruction from a qualified person.
2. MAKE SURE wiring codes and recommended electrical connections are followed. When
servicing, use only identical replacement parts. Disconnect log splitter from the power source
before making adjustments or repairs.
3. Place the log splitter on a stable, flat, and level work surface where there is plenty of room for
handling logs.
4. INSPECT THE LOG SPLITTER before each use. Keep guards in place and in working order.
Replace damaged, missing, or failed parts before using.
5. Do not alter the log splitter. Altering the tool or exceeding its design capabilities and
capacities could result in serious injury or fatality and will void the warranty.
6. MAKE SURE THE EXTENSION CORD is no longer than 25 ft. 14 gauge. Ensure the power
cord is rated for outdoor use. Ground the log splitter and avoid contact with grounded surfaces
during operation. See "Electrical Information" for further details.
7. MAKE all adjustments with the switch in the OFF position and the log splitter disconnected
from the power source.
8. Never use the log splitter for any other purpose than splitting wood. Any other use can result
in injury. Use extreme caution at all times.
9. PREPARE LOGS FOR SPLITTING. Make sure the ends of the logs are cut square. Cut off
any branches flush with the trunk.
10. INSPECT EACH LOG before splitting. Make sure there are no nails or foreign objects in the
log.
11. Only a single operator should load and operate the log splitter. Keep all others, including
children and pets, a minimum of 20 feet away from the work area.
12. NEVER TRY TO SPLIT LOGS larger than the rated capacity of the tool. Attempting to do
so could result in personal injury and damage to the tool.
Only wear safety goggles that apply with ANSI Z87.1
When operating power tools, foreign objects can be thrown into your eyes.
This could result in permanent eye damage. Glasses or goggles that are not in
compliance with ANSI Z87.1 could break resulting in severe eye injury.