AAVIX A11802 Скачать руководство пользователя страница 8

8

ON IN ENCLOSED OR POORLY
VENTILATED SPACES OR IN THE
PRESENCE OF FLAMMABLE AND/OR
EXPLOSIVE LIQUIDS, GASES AND
POWDERS.

MAINTENANCE

WARNING!

ENSURE THE BLOWER IS

DISCONNECTED FROM THE POWER
SUPPLY BEFORE PERFORMING ANY OF
THE FOLLOWING OPERATIONS.

• There are no user serviceable parts in the
blower; if a fault is suspected or the supply cord
requires replacement, return the blower to a
power tool repairer.
• Keep air intake clean and air vents free from
debris to avoid overheating the motor.
• Do not use cleaning agents to clean the
plastic parts of the blower. A mild detergent on
a damp cloth is recommended. Water must
never come into contact with the blower.
• If the blower vibrates abnormally, stop motor

immediately. Abnormal vibration usually
indicates a mechanical problem continued
operation could lead to injury or damage.
• No lubrication is necessary as the motor is
equipped with lifetime-lubrication bearings.
• Keep the ventilation vents of the blower clean
at all times, if possible, prevent foreign matter
from entering the vents.
• After each use, blow air through the blower
housing to ensure it is free from all dust
particles which may have built-up. Build up of
dust particles may cause the blower to
overheat and fail.
• If the enclosure of the blower requires
cleaning do not use solvents but a moist soft
cloth only. Never let any liquid get inside the
blower; never immerse any part of the blower
into liquid.
• When not in use, the blower should be stored
in a dry, frost free location not within the reach
of children.

Note

: AAVIX will not be responsible for any

damage or injuries caused by the repair of the

blower by an unauthorised person or by
mishandling of the blower vac. This tool is
designed for DIY use - use in commercial or
industrial environments will void the warranty.

TROUBLESHOOTING

Problem

Cause

Remedy

Blower doesn’t start

Loose locking knob

Tighten locking knob and
ensure blower tubes are
pushed onto the housing fully.

CARING FOR THE ENVIRONMENT

Power tools that are no longer usable should not be disposed of with household waste but in an
environmentally friendly way. Please recycle where facilities exist. Check with your local council
authority for recycling advice.

Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled material
decreases pollution in the environment. Please recycle packaging where facilities exist. Check with
your local council authority for recycling advice.

Содержание A11802









Отзывы: