
6
ASSEMBLY
WARNING!
: ENSURE THE TOOL IS TURNED
OFF AND DISCONNECTED FROM THE
POWER SUPPLY BEFORE PERFORMING
ANY OF THE FOLLOWING OPERATIONS.
Assembling the Blower Tube
1. Insert the upper blower tube into the
matching lower blower tube and push
together until they are connected firmly.
2. Secure in position by tightening the locking
knob.
NOTE
: Ensure the locking knob is fully
tightened otherwise the motor will not start.
3. Push the combined blower tubes into the
housing fully.
NOTE
: Ensure the blower tube is pushed fully
onto the housing otherwise the motor will not
start.
Extension Cord Retainer
The cord retaining hook is used to “anchor” an
extension lead (not included) when it is
connected to the power cord of the tool. It
prevents the extension lead from being
accidentally disconnected from the blower’s
power cable or shaken loose during use. It
should be used at all times.
1. Make a loop with the extension lead (socket
end of lead), push it through the hole and
secure over the hook as shown.
2. Once fitted, connect the extension lead
socket onto the blower’s power plug.
Shoulder Strap
1. Ensure the shoulder strap is clipped onto the
top of the blower.
2. To quickly unclip the blower, press either side
of the buckle.