AAVIX A112004, Руководство пользователя

Страница: 25 / 49

25
require a large starting current, such
as a compressor or a submergible
pump. However, this is not a
malfunction.

The ECS switch (Black) must be turned to
“ OFF ” to increase engine speed to rated
rpm. If the generator is connected to
multiple loads or electricity consumers,
please remember to first connect the
one with the highest starting current,
and last connect the one with the lowest
starting current.
12V DC OUTLET
The 12V DC outlet can be used with the
supplied charge cable and USB charger
and other commercially available 12V
DC automotive style plugs. The DC
output is unregulated and can damage
some products. Confirm your accessory
input voltage is at 12V DC. When using
the DC outlet turn the Economy Control
Switch to the “OFF” position.
WARNING:
Do not operate a
device while it is plugged in to the 12V
DC.
Battery charging
CAUTION

Be sure the battery leads are
properly connected

Be sure the breather hose is properly
connected and is not damaged or
obstructed.

At full charge, electrolyte specific
gravity is between 1.26 and 1.28.

Check specific gravity hourly.

Never smoke or make and break
connections at the battery while
charging. Sparks may ignite the
battery gas.

Battery electrolyte is poisonous and
dangerous, causing severe burns, etc.
contains sulfuric (sulphuric) acid. Avoid
contact with skin, eyes or clothing.
Antidote
EXTERNAL-Flush with water
INTERNAL-Drink large quantities of
water or milk. Follow with milk of
magnesia, beaten egg or vegetable oil.
Call physician immediately.
EYES: Flush with water for 15 minutes
and get prompt medical attention.
Batteries produce explosive gases. Keep
sparks, flame, cigarettes, etc., away.
Ventilate when charging or using in
closed space. Always cover eyes when
working near batteries.
KEEP OUT OF
REACH OF CHILDREN.

Charge the battery in the correct
procedure by following instructions in
the owner’s manual for the battery.
1. Wind the battery charging lead
(furnished as an accessory) 2 or 3 turns
around the handle and plug into DC
receptacle.
2.
Start the engine.
Turn the ECS switch
(Black) “ OFF ”.