AAVIK U-150, Руководство пользователя

Страница: 11 / 12

Remote functions
Page 11
A
A
B
C
D
E
F
G
D
F
C
G
B
VOLUME UP
Press this button to increase the volume setting.
VOLUME DOWN
Press this button to decrease the volume setting.
INPUT +
Press this button, to move to the next input. From Line 1 to Line 2 etc.
INPUT -
Press this button, to move to the previous input. From Line 2 to Line 1 etc.
STANDBY
Press this button to place the amplifier in standby mode, or to switch the amplifier
on from standby mode.
MENU
Use this button to enter the menu, or switch back to normal operation. Use the
INPUT + and INPUT - buttons to cycle through the menu, and the VOLUME UP
and VOLUME DOWN buttons to change a setting. See “MENU FUNCTIONS” for
details.
MUTE
Press the button to mute the outputs of the amplifier. A small light beneath the
mute button of the front panel will indicate that the outputs of the amplifier are
muted. Pressing the button again will reactivate the outputs of the amplifier.
FACTORY RESET
You can reset all settings back to factory
defaults. This will erase off-set settings,
the cartridge load setting, the balance
setting, the DAC settings and the remote
pairing settings. To do this, proceed as
follows:
• Switch off the amplifier at the main
power switch (Page 4, 4)
• Wait 30 seconds
• Press and hold the three front panel
buttons (Page 8, 13, 14, 15)
• Switch on the main power using
(Page 4, 4), while still holding the front
panel buttons
• All LED indicators on the front panel
will switch on, and stay on
• After approx. 8 seconds the
LED indicators will switch off again.
• Release the front panel buttons, and
switch off the amplifier using the main
power switch (Page 4, 4)
E