1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean the phono stage only with a dry, lint-free
cloth. For more thorough cleaning, unplug
the phono stage from the mains supply and go
over it lightly with a damp, lint-free cloth.
Do not use any type of chemical solvents or
other cleaning products for cleaning.
6. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus that produce heat.
7. Protect the power cord from being walked
on or pinched particularly at plugs, conve-
nience receptacles, and the point where
they exit from the apparatus.
8. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
9. Do not defeat the safety purpose of
the polarized or grounding-type plug.
10. Only place apparatus horizontally and on
a suitable table or rack.
11. Refer all servicing to qualified service
personnel.
12. Servicing is required when the apparatus
has been damaged in any way, such as when
the power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
when:
A. the power-supply cord or the plug has been
damaged, or
B. objects have fallen, or liquid has spilled into
the equipment, or
C. the equipment has been exposed to rain, or
D. the equipment does not appear to operate
normally or exhibits a marked change in
performance, or
E. the equipment has been dropped or the
enclosure damaged.
1.
WARNING
– Take care that objects do not
fall and liquids are not spilled into the
enclosure through any openings.
The equipment shall not be exposed to
dripping or splashing. Liquid-filled objects
such as vases should not be placed on the
equipment.
2. The equipment has been designed for use in
moderate climates and in domestic
situations.
3. Only connect the equipment to a power
supply of the type described in the operating
instructions or as marked on the equipment.
The primary method of isolating the
equipment from the mains supply is to
remove the mains plug. The equipment must
be installed in a manner that makes dis-
connection possible.
4. If an abnormal smell or smoke is detected
from the equipment, turn the power off
immediately and unplug the equipment from
the wall outlet. Contact your dealer and do
not reconnect the equipment.
THE EQUIPMENT SHOULD BE SERVICED BY QUALIFIED SERVICE PERSONNEL
