5
6
PRE OUT
The preamp is equipped with two sets of pre out
(preamplifier output) connections. They can be used
for power amplifiers, active sub-woofers or headphone
amplifiers.
7
LINE INPUTS
The preamp is equipped with five single-ended, RCA
line inputs. The gain of the line inputs can be changed
to equalize the volume of different signal sources. The
range is between 5 and 15 dB for input 1-4, and be-
tween 1 and 11 dB for input 5. The default gain for all
inputs is 9dB. Please see “MENU FUNCTIONS” for
guidance.
8
POWER ON/OFF SWITCH
Toggle the switch to switch between fully off and
standby mode. When the preamp is in standby mode,
the power consumption is less than 1W. When the
preamp is on, the power consumption is less than 12W.
9
POWER INLET (CAUTION!)
The preamp accepts mains voltages from 100 to
240VAC 50-60Hz.
The power inlet accepts power cables with an IEC
60320-C13 female connector.
To ensure the best performance, please consult your
Aavik Acoustics dealer for a suitable mains cable.
10
RS-232, FIRMWARE UPDATE
Only for the use by qualified service personnel.
11
TRIGGER OUTPUTS
The preamp is equipped with two DC trigger outputs.
These can be used to power-on power amps,
sub-woofers and other equipment together with the
preamp. When the preamp is switched on (not in
standby mode), the trigger outputs will supply 12VDC.
They can supply up to 80mA total.
ACTIVE CROSSOVER MODULE
Your preamp can be fitted with the optional active
crossover module. If this is fitted, there are two
additional sets of line outputs. This module can be
used for driving the bass section of a speaker with a
separate amplifier, or for use with subwoofers.
You can use the high pass and low pass outputs
together with the regular outputs, so you can supply
the main speakers with the full frequency range, and
only supply the low frequency part of the audio to the
subwoofer for instance. The crossover frequency can
be set (independently for the high- and low pass
sections) between 60 and 160Hz.
12
HIGH PASS OUTPUTS (OPTIONAL)
This set of outputs can be used, if you have a sepa-
rate power amp for the midrange/treble range.
13
LOW PASS OUTPUTS (OPTIONAL)
This set of outputs can be used, if you have a sepa-
rate power amp for the bass range, or for driving an
active subwoofer.
REAR PANEL FEATURES
RS-232
TRIGGER
OUT
ON / OFF
100-240V AC
A
MP
INTEGRATED AMP i·180
MADE IN DENMARK
PRE OUT
LINE IN
1
2
3
4
5
RS-232
TRIGGER
OUT
ON / OFF
100-240V AC
INTEGRATED AMP i·280
MADE IN DENMARK
PRE OUT
LINE IN
1
2
3
4
5
WARNING: To reduce the risk of fire or electric shock, do not expose the
amplifier to rain or moisture.
The lightning flash with an arrowhead symbol within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
‘dangerous voltage’ within the product’s enclosure that may be of suffi-
cient magnitude to constitute a risk of electric shock to persons.
