25
8.2 Drive on level ground / overcoming obstacles
Set in neutral position (see
Chapter 6.4)
» Fully retract the climber.
Pull the s-max carefully
backwards against curbs/
obstacles if you want to
overcome them.
To drive on level ground.
» push the s-max forward.
NOTE - The climber may not be extended because could get damaged!
NOTE - Always navigate obstacles backwards to avoid damaging the safety brakes!
8.3 Tilting the stair climbing system
WARNING - Always tilt the s-max when driving on slopes or during the
climbing process!
Put your foot on the housing
and tilt the s-max slightly
towards you.
» The stair climber has to be
balanced.
» If there is neither pressure
nor tension noticeable at
the handles, the device is
balanced correctly.
s-max can be moved.
»
If you tilt further or too
much, the safety brakes
engage and the s-max
can‘t be moved forward any
more.
Manufacturer’s
recommendation:
If you are not able to tilt
the s-max independently,
use the climbers as a
tipping aid
.
» Switch on the s-max
» Press the UP/DOWN
switch direction UP until
the main wheels are
raised by approx. 1-2 cm
» Tilt the s-max
(Illustration 1)
» Then, fully retract the
climber again.
» Move the s-max
(Illustration 2)
i
i
i
