Integrated Access Controller –
Installation manual
AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
All rights reserved.
5
Controller module include:
•
Communication port TCP for direct connection with KaDe Premium Plus II
•
Second reader port for two way control (Wiegand output format)
•
Door status sensor input
•
Exit button input
•
Movement detector input
•
Communication port RS485 for connection with additional modules
(for future used)
•
Supply Power connectors (+12V, 110 mA)
•
Lock control relay output
•
Alarm relay output
•
Bell control output from keypad key
LED located on front panel
-
upper left light in:
RED
-
as supply power indicator
Blue
-
access granted (light when door unlocked)
Green
-
programming mode
All components are mounted in esthetics case. KDH
-
KZ2000
-
IP
-
U_M controller is
designed for indoor use only. When entry from outdoor is needed, additional out
door reader should be connected ( np. C
-
61
-
W26/34, C
-
71
-
W26/34 for version U
or C
-
100/110M for version M)
Controller back side
-
connectors view
(pin connectors description on the next page)
J6
J7
J5
J4
J3
8 pin
2 pin
6 pin
4 pin
4 pin
