7
3 Explanation of the symbols on the device and the type plate
Symbol
Explanation
CE marking
Position: Type plate
The product complies with the relevant provisions of the EC Regulation EC 2017/745
(MDR)
20XX
Date of manufacture
Position: Type plate
Indicates the year the medical device was manufactured.
Manufacturer
Position: Type plate
Shows the manufacturer of the medical device (AAT Alber Antriebstechnik GmbH)
SN
SN
Position: Type plate
Serial number SOLO e.g. T1601XXXXXX / SOLO
+
T2001XXXXXX
Medical Device
Position: Type plate
Barcode
Position: Type plate
Contains the AAT serial number
Technical safety test badge
Position:
Inside wheel hub drive
(refer to chapter Technical safety test)
Informs about the due date of the next technical safety test
TÜV Süd test mark
Position: Inside the wheel hub drive
Refers to the fact that the product has been successfully tested by TÜV Süd Product
Service GmbH according to the standards DIN EN 12182, DIN EN 12184 and the
relevant parts of ISO 7176.
Observe the user manual!
Position: Next to the type plate
The user manual must be observed! (www.aat-online.de)
Refers to the need for the user to review the user manual and important safety-related
information.
Open and closed lock
Position: Coupling disc
(refer to chapter: Engaging drive wheels)
Informs about the state of the respective drive wheel.
+ = engaged
+ = disengaged.
Information arrow Mounting pin on the wheel
Position: Below mounting pin on both wheels
(refer to chapter "Mounting - Drive wheels")
Informs about the correct attachment procedure for the wheels.
Note Positioning of the anti-tip supports (refer to chapter 5 4)
Position: Anti-tip supports
Informs about the correct insertion of the anti-tip supports.
Incorrectly inserted anti-tip supports are indicated by the "thumbs down" symbol and a
red crossed out arrow.
