AAT Holding KaDe KDH-KZ620U, Руководство по установке

Страница: 12 / 28

Integrated Access Controller – Installation manual
All rights reserved. © AAT HOLDING S.A.
12
Notes:
When set into Wiegand Reader mode, nearly all settings in Controller Model will
become invalid. And Brown & Yellow wires will be redefined as below:
-Brown wire: Green LED light control
-Yellow wire: Buzzer control
If you need to connect Brown/Yellow wires:
When the input voltage for LED is low, the LED will turn into Green; and when
the input voltage for Buzzer is low, it will sound.
Set Wiegand Output Formats
Please set the Wiegand output formats of reader according to the Wiegand input
formats of the controller.
Remarks: 4 means that reader send to the controller 4 bits after press each key
on keypad, 8 means 8 bits, 10 means 10 digits virtual number.
Programming Step Keystroke Combination
1. Enter Program Mode * (Master Code) #
2. Wiegand output bits
PIN output bits
8 (26~37) # (factory default is 26bits)
8 (4 or 8 or 10) # (Factory default is 4bits)
3. Exit *
WIEGAND READER MODE
KDH-KZ330 can work as Standard Wiegand Reader, connected to the third party
Controller, command 8 1 #
KDH - KZ620 - U/H as Wiegand reader Controller