Supplementary features
27
■
To answer the callback request
Someone has asked you to call back. You can tell this from the lit attention LED in the idle state.
The display reads
Call back requested...
■
Call Waiting on an Internal Subscriber
You want to talk to an internal subscriber. However, the person is busy.
As a result of your call waiting, the person hears a call waiting tone and your phone number or
name appears on his display. The person can either answer or reject your call.
Requirement: It is essential that the internal subscriber has not barred the Call waiting function
on his phone (for configuration see the Chapter
"Protect against Do not disturb/Call waiting/
Intrusion/Announcement/Forward", 60
).
Ask your system administrator whether the Call waiting function is enabled on the system.
Reset
Reset callback:
Press the
Reset
Foxkey.
➞
Callback is deactivated.
Note:
You can only have 1 callback activated at a time and only 1 callback can be
expected from you. Your callback request will automatically be cancelled by
the system after about half an hour.
Call
Press the
Calls
Foxkey.
➞
The phone number is dialled.
Note:
You can deactivate a requested callback using
Menu
>
Activated features
>
Reset
Foxkey.
Call waiting
Subscriber is busy:
Press the
Call waiting
Foxkey.
➞
You hear the dialling tone.
Note:
If the person rejects your call request or if call waiting is not possible, the call is
disconnected (busy tone).