Aastra Maestro 900DSS Owner's, Руководство пользователя

Страница: 6 / 45

Important Tips
3
➤
Locate the Base away from electrical equipment such as other telephones,
radios, computers, refrigerators, fluorescent lights, stereos, etc., to prevent
interference. Centrally locate the Base, preferably on an upper floor.
➤
For the best performance, do not use a power bar.
➤
If you have another cordless phone or answering machine, attempt to
position the Base units as far away as possible from each other.
➤
The Base antenna should be in a vertical (upright) position.
➤
Your phone will NOT operate during a power failure.
➤
For your new Mæstro 900 DSS phone to display incoming caller information,
you must subscribe to a Caller Identification service from your local
telephone company. You may also need to subscribe to some of the following
services in order to fully utilize all your 900 DSS features:
✍
Call Waiting or Call Waiting ID, Message Waiting or Visual Message Waiting, Voice Mail
Services or Visual Voice Mail Services and 3 Way Calling. Your local telephone company may
use different names for these services.
➤
If the 900 DSS multipurpose light and message prompt are not activated
when you have messages, contact your local telephone company to ensure
they have activated both the feature for messages and the “visual” message
waiting feature to turn on the multipurpose light. The light will only activate
when the Handset is in the Base (this conserves battery power).
➤
Keep the Handset off the Base unless you are charging. This will increase the
life of the battery pack.
➤
After charging the battery pack, the Handset may be warm to the touch.
This is normal, do not be concerned. Note that the power adapter will also
feel warm to the touch if it has been plugged in for a while; again, there is
no need for concern.
➤
Turn the Power Saver Option on (page 11) for maximum Standby and Talk
time.
➤
You will consume more Standby time when you operate or leave the
Handset at an extreme range from the Base.
➤
If the Handset displays the message “Out of range”, see page 29 "The
Handset display shows
Out of range ."
➤
The Security code automatically changes when the Handset is placed in the
Base.
➤
Your Handset will have a greater range in a wooden dwelling rather than a
concrete or metal dwelling.
I
MPORTANT
T
IPS
P0876162 02 E D900.UG Page 3 Wednesday, March 25, 1998 4:43 PM