Aastra 7187a, Руководство пользователя

Страница: 23 / 38

Aastra 7187a Analogue Telephone
23
Area Code Filter
If area code was set (see “Area code setting”), the phone will compare and
filter the initial digits of the incoming number
.
An example:
The area code was set “755”.
If the incoming call’s number is “755-12345678”, then caller ID will be
displayed “12345678” while “755” will be filtered.
Note: Only numbers with 7 digits or longer could be filtered the area code.
Otherwise the complete number with area code will be displayed
Speed Dial Memory
There are seven keys (M1-M7) for storing frequently used number. You
can store two numbers per key by using (shift+M1-M7)
Save a Memory
1. Replace the handset on the phone
2. Press memory key (M1 to M7) or “second level” memory keys
(Shift + M1 to M7)
3. Press and enter the name to be saved
4. Press and enter the number to be saved
5. Press key again to complete saving
Note: For some rare conditions it may be useful to insert a pause between
e.g. the area code and the phone number. To do this; enter the area code,
press the pause key and then continue with the telephone number.
Protect All Memories
It is possible to set a password in the telephone for speed dial and phone
book entries. Please see “
Set Password
” found below under the
paragraph for “Phone setting”.
Dial from a Memory key
1. Pick up the handset or press
2. Press memory key (M1 to M7) or “second level” memory keys
(Shift + M1 to M7) to be dialed