A
ASTRA
6700
I
SIP T
ERMINALS
FOR
MX-ONE
8
26/1531-ANF 901 14 Uen E10 2014-01-22
5
Setting up the Software Server
The software and the configuration files used by the IP phones shall be
stored on a server where the IP phones can fetch them. The server is
called IP Phone SW Server.
Figure 1: Deployment Scenario when telephony domains use different
SW servers
In the Telephony Server you can define multiple telephony domains. The
telephony domains are managed through the Manager Telephony
System web interface.
The IP phone configuration files are preferably generated through the
Manager Telephony System (MTS). To enable the files to be generated
through Manager Telephony System, the
IP Phone SW Server Configu-
ration Management Application
must be installed on the IP Phone SW
Server. Once generated the configuration files can viewed directly on the
IP Phone SW Server.
The IP phones can use the following protocols to download the software
and configuration file(s): http, https, ftp, tftp. The recommendation is to
use the http protocol and it is described in these installation instructions.
If MTS for some reason is not used, stop reading and go to chapter “How
to start a new phone”.
Setting up the software server comprises the following steps:
•
Installing the IP Phone SW Server Configuration Management
Application.
Telephony
Server
IP Phone
SW Server
Manager Telephony System
IP Phone
SW Server
Telephony Domain A
Telephony Domain B
IP Phone SW Server
Application installed
