65
Idle mode or in the charger cradle. This setting reduces the life of the battery.
Display
Here you can select for how long the full display illumination (each time a key is
pressed, for instance) remains active (10 ... 240 s).
Keyboard
Here you can select for how long the keyboard illumination remains active each
time a key is pressed (Light off, 1 ... 240 s).
Charger
Here you can select for how long the display illumination remains active if the
device is placed in the charger cradle (Light off, 1... 240 s).
Conversation
To save battery energy, you can use this feature to specify the behaviour of the
display illumination during a call (Light off, Light on, 10 ... 240 s).
If you have selected
Light off
the display will always be dark during a call. You
can switch on the illumination for a short time by pressing one of the 3 softkeys
(located directly beneath the display).
LED indications
You can switch the LED indicators on/off according to requirements (see also
page 18).
Life indication
Slowly flashing green or orange LED.
Deactivated if the charge indication
(orange or green LED) is also deactivated.
Incoming call
Rapidly flashing green or orange LED for
incoming call.
Out of range
Rapidly flashing red LED if you are moving out of the
system's radio range
Charge indication
LED lights up orange when the battery is being
charged and switches to green when fully charged.
Infos
Slowly flashing red LED for a new entry,
e.g. in the call list.
Handsfree
Lights green LED when the loudspeaker
is activated.
Appointment
Slowly flashing red LED when the appointment
is signalled.
Alarm clock
Slowly flashing red LED when the alarm time
is signalled.
List access
The caller list and/or redial list are normally administered on your handset (setting: Local). If
a list is also managed in the communication system (setting:
PBX
), you can select which list
you want to display. Select
Automatic
to ensure that the device always uses the list (where
available) from the
PBX
communication system. If the list is not available, the automatic
selection remains on
Local
. Selecting
PBX
(or
Automatic
/
PBX
) makes sense if your handset
is operating in parallel with corded phones. This ensures that both devices have access to
the same list and that any changes made are visible on both devices.
Devices menu