40
Making internal / external calls
If you see the message
No record!
when dialling a phone number, your phone may be blocked by
the system. If so, please notify your System Administrator.
Briefly press the Call key
and / or
t
key in the internal or external phone number preceded by the code to seize external
lines.
Press the Call key.
… or
Press
❯❯❯
and select a phone number from the following lists
• Caller list
• Redial list
• Personal directory, Central directory
Only on Aastra 622d, 632d, 650c with set icon menu structure
(For menu structure, see page 64)
If you enter the start of a number and press the softkey
, then the handset searches
the personal directory for all names and numbers that start with this number sequence.
Select the required entry and press
Ok
.
Note
Correcting your input during predial
• To delete individual digits, briefly press the
C
key;
• To delete the entire phone number, press and hold down the
C
-key.
Toggling between digit and letter input (where supported by the system)
Press the *-key several times.
• Digit input: display reads
123
• Letter input – upper case, then lower case: display reads
Aa
• Letter input – upper case: display reads
A
• Letter input – lower case: display reads
a
Setting the character set
During character input you can change the character set by pressing
❯❯❯
. The selected setting is
then adopted as the default (inputs begin with either digits or letters). This setting can be reset tem-
porarily during the input by pressing the *-key once again.
Telephoning
