Installation and first-time operation
Aastra 610d
109
eud-1290/1.2 – R3.0 – 04.2013
Battery
Take also note of the safety information on handling the battery set out in chap-
ter
, page
Inserting the battery
1. Push the battery cover downwards until it is released from the lock, then take it off.
2. Insert the battery with the contacts downwards.
3. Replace the battery cover and push it upwards until it locks.
Charging the battery
The batteries are supplied uncharged. To charge the batteries, place the phone in the
charging unit.
It is only after the battery has been charged for the first time that your phone is ready
for use, that calls can be answered and that you can make calls from the phone.
Notes:
• It takes several charging cycles before a new battery reaches full capacity.
• The technical data can be found in the chapter
• The descriptions of the display symbols can be found in the chapter
, page
• Poor radio links (sizeable distance to the system’s radio station) will reduce the
phone’s standby and talk times. The standby and talk times are also reduced by
high loudspeaker, ring tone volumes or frequently used keypad and display back-
lighting.