Page 12 American Access Systems / Security Brands, Inc.
Set Sleep Code -- Sub-Mode 4
DETAILS: The Sleep Code is used to disable all Relay A and Function Codes from the keypad. This feature is most
commonly used in applications where no entry is desired after hours. Relay B codes will continue to be valid from
the keypad. By connecting both relays in parallel, managers may be assigned Relay B codes and still gain access.
While in the SLEEP MODE, the yellow and red LED’s will flash every 3 seconds. To initialize the system back tonormal,
simply re-enter the Sleep Code. Should you lose or forget the Sleep Code and the unit is in the sleep mode you must
complete a Master Reset. See the instructions on page 18.
To program or change the Sleep Code:
• Enter the current Master Code
• Press the numeral 4
• Unit will sound a GOOD TONE
• Enter a new Sleep Code (If you hear an ERROR TONE, select another code that is not already in use)
• Unit will sound a GOOD TONE
• If you make an entry error, simply press the star (*) key and enter the number you wish
• When the new Sleep Code is accepted you will hear a GOOD TONE
• Press the pound (#) key to exit the programming mode
