HINT:
Using the up/down arrow keys, you can directly move the position relati-
ve to the
Reference level
.
7.8 Range
(Dynamics)
Range
sets the “size” of the visible range. Setting Range to 100dB (maximum)
will give you the best possible overview of all signal sources. The vertical bars
of the individual signals are virtually being “squeezed” from top to bottom to fit
all signals into the display. On the other hand, when
Range
is set to 50, more
details will become visible, though a few signals might now be “cut off” at the top
or bottom. In the end, the
Range
function is comparable with a “magnifying
glass”, though it only works in the Y axis.
7.9 Atten
(Attenuator)
An
attenuator
attenuates (weakens) the input signal by the corresponding dB
amount. This makes sense especially with very strong signals to avoid overloa-
ding the RF input. Available choices are:
Auto
= The attenuator is chosen automatically (default setting)
0dB
= No attenuator
10dB
= Attenuate input by 10 dB
20dB
= Attenuate input by 20 dB (only HF-6080!)
30dB
= Attenuate input by 30 dB (only HF-6080!)
ATTENTION: When “Auto” is switched off, you NEED to manually select an
attenuator with signals over -20 dBm to avoid mismeasurement!
7.10 Demod
(Demodulator/Audio analysis)
The
Demodulator
allows you to make pulsing and modulation up to approx.
3,5kHz audible. SPECTRAN distinguishes between two
modulation modes
:
AM
(amplitude modulation) and
FM
(frequency modulation). The dot-key can
later be used to switch between
AM
and
FM
at any time. By pressing
Off
or by
pressing the menu key, the
demodulator
is switched off.
Range
(dynamics)
7.0 The main menu
25
Reflev
(Reference level)
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
Содержание SPECTRAN HF-2025
Страница 72: ...23 0 For your notes 72...