HW © 2015 Aaronia AG, DE-54597 Strickscheid
8
Manual MagnoTRACKER
MagnoTRACKER
4.
Frequency-Selection
The Selection can be done by choosing four control dials which cover four different scopes
respectively:
x1; x10; x100; x1000
A fine-adjustment can be done by the big control dial (0-15).
The frequency selection of this antenna is very accurate, so that the disturbing and
„uninteresting“ signals will be reduced very efficiently. The antenna has a SMA connector as
output with 50 Ohm impedance. You can simply connect the antenna to your receiver,
spectrum analyzer, oscilloscope, power meter, etc.
Attention: The MagnoTRACKER ELF Models (ELF-2 und ELF-6) do not offer any
kind of frequency selection!
These antennas are usable over the full frequency range from 1Hz to 9kHz without
selection.
Big control dial
(Fine adjustment 0-15)
Control dial
x1
Control dial
x10
Control dial
x100
Control dial
x1000
Slide switch
Y
Slide switch
X
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
