9
If the 3.5M dome cable is long enough to reach the MOTOSAT control unit
without using the included 5M extension cable please skip this step:
When using the extensions cable carefully click the two black connectors
together (take care you do-not bend any of the pins when doing this and
that none of the wires “sneak” out the rear of the connectors). For the two
coaxial signal connectors (thin cables), gently tighten
BOTH PLUGS
with
pliers holding the plug and socket at the same time. Do not allow the coax
cables to twist as you tighten these plugs as damage may occur.
The junction box can now be secured (using the supplied stainless screws)
and glued to the roof of the vehicle.
The Junction Box fully
assembled and fitted
to the vehicle roof
(adhesive not shown)
If using the
supplied 5M
extension cable
ensure that when
joining the two
Coax Cables that
the
plugs
are not
allowed to twist as
you tighten them.