AAON Orion ASM01819, Техническое руководство, Страница: 10 / 20

APPENDIX
E-BUS Digital Room Sensor Technical Guide
10
Pixel Test Screen
To select the first option—
Pixels — touch <

> while at
the Sensor Configuration &
Test Screen ( Figure 12 ). The
Pixel Test Screen tests the pixels
of the LCD display, allowing
you to make the screen white
with black characters, black
with white characters, or a
black or white screen. To exit
this screen,
touch
<Display>
.
Sensor Info & LED Test Screen
To select the second option—
Info & LEDS —touch <  >
while at the Sensor Con fi gura-
tion & Test Screen ( Figure 12 ).
The Sensor Info & LED Test
Screen shows the version of
software that the sensor is run-
ning and allows you to test the
LEDs that are used on the con-
troller.
Touching <

> will turn
the LEDs on and touching <  >
will turn the LEDs off . To exit
this screen,
touch <Display> .
Sensor Con fi guration and Test Screens
Sensor Con fi guration and Test
Screens
To access the Sensor Con fi guration & Test Screens , you fi rst need to
access the Unit Information Screen by touching
<Display>
while at
the Main Display Screen .
NOTE:
While in the Sensor Con fi guration & Test Screens , the
<Display> button functions as an exit key to return to the
previous screen or menu. After a few seconds, however,
the sensor will automatically revert to the
Main Display
Screen . Refer to Figure 11 when reading the instructions
that follow.
Sensor Con fi guration & Test Screen
While the Unit Information
Screen is being displayed, you
can enter the Sensor Con fi gura-
tion & Test Screen options by
touching simultaneously below
the
<Display>
and
<Over-
ride> buttons. (See Figure 11
which shows where to touch to
access this option.)
Override
Button
Display
Button
Touch
Here
Touch
Here
Display Override
Figure 11: E-BUS Digital Room Sensor Buttons
Figure 12: Sensor
Confi guration & Test
Screen
Figure 14: Sensor Info &
LED Test Screen
Figure 13: Sensor Info &
LED Test Screen