1.
Press
SET
to enter the Setting Mode.
2.
Wait for the setting option to flash, then press
DISP
or
MEM
to set
values. You can press and hold these buttons to rapidly set the values.
3.
Wait 3 seconds for the activity monitor to automatically confirm and
move to the next setting option. The setting sequence is: stride length
unit, stride length value, weight unit, weight value, 12/24 time format,
time (hour and minute), alarm On/Off, alarm time (hour and minute) (if
alarm On is selected) and beep tone On/Off.
NOTE:
You can press SET to skip through settings.
REMARK:
Press any button to silence an activated alarm. If not
deactivated, the alarm will be activated at the same time the
following day.
Memory Mode:
In the Memory Mode, you can view the records of your steps and calories
burned for the past 7 days.
1.
MEM
to enter the Memory Mode.
2.
Press
DISP
or
MEM
to select which day to view.
NOTE:
• When toggling between days, the record displayed will be of the same
category (either step count or calories burned).
• When viewing a day’s record, the activity monitor will automatically
toggle for 3 seconds between step count and calories burned display.
6
