A&D UC-351PBT-Ci, Инструкция по эксплуатации

Страница: 12 / 76

English 9
Measuring Your Weight
Step On Weighing
1.
Confirm that the scale is
turned off, and step on
the scale gently.
 Measurement starts when you step
on the scale.

A progress bar is displayed during
measurement. Stand up straight and
remain as still as possible during
measurement.
≪♪
Beep
≫
2.
Step off the scale when
"StEP" and "oFF" are
alternately displayed
with three beeps.
 If you do not step off, the scale
beeps every two seconds.
 The scale turns off automatically
after 2 minutes.
 All display segments are indicated
when you step off the scale.
 Do not touch the scale while all
display segments are indicated.
It may cause misreading.
≪♪
Beep beep beep
≫
3.
Confirm the
measurement results.
 The scale turns off automatically 15
seconds after the measurement
results are displayed.

Data is automatically sent to the
receiver if the receiver is in the
receivable state.

If the scale is not paired with a
receiver, the data is stored in the
scale memory.
(See "Transmitting Temporarily
Stored Data (P.10)".)
 Data stored in the scale memory
cannot be viewed on this scale.
 You can also shut the power off by
pressing the setting switch.
kg
k
lb
g
in
c