English
13
Recalling the Memory Data
Note: This device stores the last 60 measurements in memory.
1. Press the button when turning the device off.
The average of all measurements and the number of data are displayed.
If no data, “0” is displayed. Press the or
START
button to turn the
device off.
2. Use the following buttons to display data (of number and measurement data).
Select a user from user
and user
using the
SET
button.
The device displays the average of all measurements and the
number of data are displayed.
Pressing the button each time , the device displays as follows
:
Average data of all AM (morning) measurements taken between
4:00 and 9:59. In the example, If no data, is displayed.
Average data of all PM (evening) measurements taken between
18:00 and 1:59.
Data (of number and measurement data).
The device displays in order from most recent data. The date
and time are displayed alternately while displaying the
measurement data.
In the example
:
No.30 & data No.29 & data
No.01 & data.
3. If you press the button after oldest data is displayed, the device
proceeds to step 1, the average of all measurements and the number of
data are displayed.
4. Press the
START
button to turn the device off.
After one minute of non-operation, the device will turn off automatically.
button
Turn off
button
Memory mode
User selection
Example: user
Average of all the data
Number of all data
Average for AM data
AM indicator
Number of AM data
Average for PM data
PM indicator
Number of PM data
Ex.: No.30
Most recent data
Date
Time
3 seconds
Last data (Oldest)
Date
Time
3 seconds
button
button
button
button
button
button
Turn off
