English
5
Operation Mode
1. Normal Measurement With Storing Data
Press the START button. Blood pressure is measured and data is stored
within the device. The device can store the last 90 sets of data in memory.
2. Recalling The Data
Press the MEMORY button to recall the data.
The average data of all the measurements
is displayed, as indicated in the figure at the
right.
Then, each time the MEMORY button is
pressed, the memory data is displayed from
the most recent.
For details on recalling data, refer to
“Recalling Memory Data” .
The device can store the last 90 sets of
data in memory.
3. Clearing The Data
Press and hold the MEMORY button until the “ ”
(memory) mark blinks to clear the stored data.
4. Measurement With The Desired Systolic Pressure
Refer to page 10 for measurement with the desired systolic pressure.
5. Switching The Unit Of Temperature
In the clock setting mode, when the dashes
in the temperature displaying area are
blinking, press the PM button to select °C
or °F. Then, press the AM button or START
button to return to the clock display.
For details on the clock setting mode, refer
to “Adjusting The Built-in Clock” on page 7.
Select the unit
of temperature
M
M
M
Average of
all the data
Averaged systolic
Averaged diastolic
Number of data
Press
Most recent data:
Displays alternately
every 3 seconds
