A&D UA-767F-W, Инструкция по эксплуатации

Страница: 13 / 28

English 12
Using the Monitor
Adjusting the Built-in Clock
Adjust the clock prior to use.
1. Press and hold the
SET
button until the
year starts blinking.
2. Select the year using the
or button.
Press the
SET
button to set the current
year and move to month/day selection. The
date can be set anywhere between the years
2013 and 2059.
3. Select the month using the
or button.
Press the
SET
button to set the current
month and move to day selection.
4. Select the day using the
or button.
Press the
SET
button to set the current day
and move to hour/minute selection.
5. Select the hour using the
or button.
Press the
SET
button to set the current
hour and move to minute selection.
6. Select the minute using the
or button.
Press the
START
or
SET
button to turn the
device off.
Holding down the or button will
change the value continuously.
Note: After three minutes of non-operation, the
device will turn off automatically.
When the clock has not been
set, the clock display indicates
dashes as shown to the right.
When using the device for the first time, the clock is not adjusted.
When the device is disconnected from the power supply, the set
date and time will be erased.
When the set date and time is erased, please adjust again.
START
Press and hold
Year
Month
Day
Hour
Minute
or
or
or
or
or
Pressing the
START
button will turn the
device off anytime.
or
Turn off