A&D TN-2655, Инструкция по эксплуатации

Страница: 20 / 40

14
6. INSTALLING THE PRINTER PAPER
(This chapter is applicable only to the TM-2655P.)
With the power turned on, install the printer paper as follows:
1. Cut the top end of the printer paper with scissors. If the end is
not smooth, it may cause a paper jam or damage the printer
head.
2. Press lightly on the center of the printer cover to open the
cover.
3. Raise the lever located on the right side of the printer.
Set the lever to the up position (2) of the figure .
The insertion of the printer paper is enabled.
4. Insert the printer paper into the paper feed slot as shown.
The paper is fed automatically.
5. Press the PAPER FEED switch to feed the paper by about 10
cm. Confirm that the paper is fed straight. If not, re-install the
paper because it may cause a paper jam.
Printer cover
Raise the lever to the
up position (2) .
Lever
PAPER FEED switch
Paper feed slot