![background image](http://html2.mh-extra.com/html/aandd/tm-2430/tm-2430_instruction-manual_3078882018.webp)
Page 16
Mode
III
Settings
Set up procedure
Before you enter into mode III, read the procedure below. Also, refer to the
example on the next page for the setting procedure.
❏
Each blocks starting time must match the previous blocks finish time.
❏
The end of block 6 automatically equalizes to start time of the block 1.
❏
If you enter the block 1 start time in any other block, these parameters are
saved and this sequence is finished.
❏
When selecting 120 minutes for the current frequency, you must adjust the
start time of the next block so that the current block fits a multiple of 120
minutes. If you do not fit to the next start time, an error code is displayed.
❏
The recorder displays as 60 minutes and
as 120 minutes.
❏
When you enter the sequence of mode
III
settings, the recorder initializes each
start time to the start time of block 1 and each frequency to "-" (not used).
To read the current settings, press the
START STOP
key in this sequence.
Display & key
Sequence number
Parameter
Selecting a
parameter
AUTO
ON/OFF
START
STOP
Selecting a sequence number
Sign of setting parameters
for automatic measuremnt
Items
Selection for the Automatic Measurement
Initializing the recorder
Sequence
number
01
02
03
04
05
06
07
08
09
10
11
12
13
Parameters (monitor)
0 ~ 23 o'clock
- , 5, 10, 15, 20, 30, 60, 120 minutes
0 ~ 23 o'clock
- , 5, 10, 15, 20, 30, 60, 120 minutes
0 ~ 23 o'clock
- , 5, 10, 15, 20, 30, 60, 120 minutes
0 ~ 23 o'clock
- , 5, 10, 15, 20, 30, 60, 120 minutes
0 ~ 23 o'clock
- , 5, 10, 15, 20, 30, 60, 120 minutes
0 ~ 23 o'clock
- , 5, 10, 15, 20, 30, 60, 120 minutes
0 ~ 23 o'clock
Meaning
Start time of first block
Frequency of first block
Start time of second block
Frequency of second block
Start time of third block
Frequency of third block
Start time of fourth block
Frequency of fourth block
Start time of fifth block
Frequency of fifth block
Start time of sixth block
Frequency of sixth block
End of sixth block
Initial value
The "-" means "not used".
Содержание TM-2430
Страница 36: ...Page 34 MEMO...