E-15
Taking your Blood Pressure
Normal Measurement
1. Place the cuff on the arm (preferably
the left arm). Sit quietly during
measurement.
2. Press the START button. All of the
display segments are displayed.
Zero is displayed blinking briefly.
Then the display changes, as
indicated in the figure to the right,
as the measurement begins. As
the cuff inflates, it is normal to feel
the cuff tighten around your arm.
During inflation, a pressurization bar
is displayed, as shown in the figure
to the right.
Note: If you wish to stop inflation at any time, press
the START button again.
3. When inflation is complete,
deflation starts automatically
and the (heart mark) blinks,
indicating that the measurement
is in progress. Once the pulse is
detected, the mark blinks with each
pulse beat.
Note: If an appropriate pressure is not obtained, the
device starts to inflate again automatically.
4. When the measurement is
complete, the systolic and diastolic
pressure readings and pulse
rate are displayed. The device starts data transmission. The cuff
exhausts the remaining air and deflates completely.
5. Press the START button again to turn off the power.
Note: This product is provided with an automatic power shut-off function, which turns the power
off approximately one minute after measurement.
At heart level
All of the display
segments
Press the START button
Zero display
Starts inflation
Pressurizing
Turn off with the
START button
Data Transmission
