A&D Omniace III RA2300A, Инструкция по эксплуатации

Страница: 57 / 196

6. Auto Setup (Automatically Setting Recording Conditions)
RA2300A Recorder (7001754-R01) 6-3
6.3. Auto Sampling
The auto sampling function sets the monitor displaying speed, chart paper feed speed, memory
sampling rate, and file recording rate based on the signals currently input.
6.3.1. Target Setup Conditions
The relation between settable conditions and mode are as follows. The monitor displaying speed is
always settable.
Measurement Mode
Pen
Recorder
Memory HD Multi X-Y
Monitor displaying speed Available Available Available Available -
Chart feed speed Available - - - -
Memory sampling rate - Available - Available -
File recording rate - - Available - -
X-Y sampling rate - - - - -
Available: Adjusted, -: Not adjusted
In the X-Y Recorder mode, the auto sampling does not function. (For X-Y data sampling rate,
make adjustment with seeing the monitor.)
6.3.2. Adjustment Range
Chart feed speed Memory sampling speed File recording speed
100 mm/s (1 ms) 1 μs 10 μs
50 mm/s (2 ms) 2 μs 100 μs
20 mm/s (5 ms) 5 μs 200 μs
10 mm/s (10 ms) 10 μs 500 μs
5 mm/s (20 ms) 20 μs 1 ms
1 mm/s (100 ms) 50 μs 2 ms
100 mm/min (60 ms) 100 μs 5 ms
50 mm/min (120 ms) 200 μs 10 ms
20 mm/min (300 ms) 500 μs 20 ms
10 mm/min (600 ms) 1 ms 50 ms
5 mm/min (1.2 s) 2 ms 100 ms
1 mm/min (6 s) 5 ms 200 ms

The values in parentheses in chart feed speed corresponds to the data sampling speed.
TIPS