A&D Omniace III RA2300A Скачать руководство пользователя страница 25

Страница: 25 / 196

2. Name and Function of Each Block

RA2300A (7001754-R01)

2-5

(6) Replay: Replay of recorded data

The replay monitor screen, which has gray background, offers replay and observation of the

data

stored

memory,

internal

HDD,

and

external

media.

Replay

format

can

selected

from

among waveform, value, and X-Y.



Buttons related to recording

(7) Amp: Displaying the amp screen

Setting for amp units such as range and input ON/OFF can be made.

(8) Recording conditions: Setting recording speed

Settings

for

recording

such

sampling

speed,

chart

feed speed,

pre-trigger

settings

are

made.

(9) Trigger: Displaying trigger screen

Settings

for

trigger

conditions

such

trigger

level

selection, trigger level setup, and trigger

conditions.

(10) Auto: Automatic operation settings

Auto makes automatic settings for analog amp range and recording speed.

(11) Display/Printing: Settings for data display on the monitor and

printing on the chart paper

Printing and display format can be set.

(12) System: Displaying system screen

The following settings are available: Measurement mode that decides measurement method,

Maintenance that sets date, RS-232C, LAN, and Communication that sets remote.



Buttons related to recording and printing

(13) Chart Feed: Feeding chart recording paper

While this button is pressed, chart recording paper is fed.

(14) Screen Copy: Hard copy for screen

Pressing this button makes hard copy for the current screen. The output media (paper or bit

map file) can be designated in the system settings.

(15) Trigger: Trigger LED

LED comes on when the trigger is generated.

(16) Marking/Manual Trigger: Adding mark indication on printing or

manually triggering

Mark indication such as time can be added to printing. Measurement can be started by man

ual trigger.

(17) Start: Starting measurement

Pressing this button starts measuring. The LED of the button blinks during the measurement.

(18) Stop: Halting operation

Pressing this button halts the measurement or operations such as screen hardcopy.

(19) HDD/POWER: LED

HDD: LED blinks when the internal HDD is accessed.

POWER: LED blinks immediately after power-on.

Содержание Omniace III RA2300A





































































































































































































Результаты поиска

Содержание Omniace III RA2300A

Отзывы:

Бренды по названию

Популярные бренды

A&D Omniace III RA2300A, Инструкция по эксплуатации

Результаты поиска

Содержание Omniace III RA2300A

Отзывы:

Бренды по названию

Популярные бренды