A&D HV-15KC Скачать руководство пользователя

Страница: 15 / 92

HV/HW-C/CP Series

Page 13

5.2. Installing the Batteries for Type C

Step 1 Turn off the display.

Remove the AC adapter.

adapter

Please confirm that the AC adapter type is correct
for your local voltage and receptacle type. The AC
adapter may not be provided for some areas.

Step 2 Open the battery cover and inner cover in that order.

Push the battery cover and slide it.
Push the hook of the inner cover to the left and lift it.

Step 3 Insert four new batteries with proper polarity (

Batteries are type D, Mono, R20P , R20PU or LR20.

Step 4 Close the covers in the reverse of the order of step 2.

Caution

When batteries are consumed mostly, the battery mark

is displayed.

Replace batteries with four new ones, when

is displayed.

Do not mix used and new batteries. Do not use batteries of different type and manufacturer.

Doing so may cause damage to the batteries and the scale.

Check the battery direction. If the batteries are installed in the wrong direction, it may cause

battery leakage. If the direction of just one battery is wrong, the scale may work temporarily.

The battery life depends on the ambient temperature. It becomes shorter in low temperatures

such as in winter.

Remove the batteries from the display unit, when the scale is not to be used for a long time.

Leaving them installed may result in leakage and cause damage.

Damage due to battery leakage is not covered under warranty.

Step

Hook
Inner cover
Battery case
Battery cover

AC adapter

Step1

Batteries

Step

Battery cover

Step

Содержание HV-15KC





























































































Результаты поиска

Содержание HV-15KC

Отзывы:

Похожие инструкции для HV-15KC

Бренды по названию

Популярные бренды

A&D HV-15KC, Инструкция по эксплуатации

Результаты поиска

Содержание HV-15KC

Отзывы:

Похожие инструкции для HV-15KC

Бренды по названию

Популярные бренды