A&D HT-120, Инструкция по эксплуатации

Страница: 6 / 12

6
Errors
e e eeee
Overload. Remove object from the weighing pan.
------
Out of range or unstable error. There is a load beyond the zero
range at the power-on. When pressed the RE-ZERO key or
powered on, unstable weighing shows this display either.
lb eeee
Low battery. Replace batteries with four new ones immediately.
Cal ee e
Calibration error. Unstable weighing or incorrect calibration weight.
err ee
# Internal errors (# will be 1, 2, 3, 4, 5 or 6). Request service.
FUNCTIONS
Entering the Function Settings
Turn the scale turned off and press the ON:OFF key while
pressing the RE-ZERO key. Then, the display will show the
software version
p-1.00
(“1.00” is an example and may be a
different number.) This is the starting point of the function settings.
Key Operation
UNITS key To select a function item.
RE-ZERO key To change the parameter of each item.
ON:OFF key To finish the operation and turns off the scale.
Starting at the software version display, each function item appears
cyclically by pressing the UNITS key.
°
p-1.00
°
poff 1
°
Cond 1
°
trc 1
°
Unit
°
ltUp 3
°
pnt 0
Press the RE-ZERO key.
To select the weighing units.
“ ”, “ ”, “ ” and “ ” show the movement by the UNITS key.
While the display shows function item, press the RE-ZERO key to
change the setting.
To finish the settings, press the ON:OFF key to turn off the scale.
°
Unit 2
°
Unit 1
°
Unit 3
°
Unit
°
Unit
°
Unit
°
Unit
°
Unit
°
Unit
°
Unit
°
Unit
°
Unit