![A&D HT-120 Скачать руководство пользователя страница 4](http://html.mh-extra.com/html/aandd/ht-120/ht-120_instruction-manual_446468004.webp)
4
ON:OFF key
Turns the scale power on/off.
RE-ZERO key
Sets the display to zero. When the weight is within ±2%
of the weighing capacity to the zero point at the
power-on, the key will zero the scale. When the weight
e2%, it will be subtracted as tare weight.
MODE key
Changes the weighing units.
STABLE indicator
Turns on when the weight reading is stable.
NET indicator
Turns on when the net weight is displayed.
ZERO indicator
Turns on at the center of zero point. At the net weight
zero point, both the ZERO and NET turn on.
Battery indicator
Shows the remaining battery level in 4 steps when
operated by batteries.
PREPARATION
Installing Batteries
Step 1 Remove the battery cover.
Step
2
Before use, remove the
insulation tape from the
battery compartment.
Step 3 Insert 4 new batteries into the
battery compartment, taking
care of the polarities.
Step 4 Replace the battery cover.
STABLE indicator
NET indicator
ZERO indicator
Weighing units
Battery indicator
Battery cover
4 new batteries
Insulation tape
Step 1
Step 2
Security slot
(Use a security cable
commercially available.)
AC adapter jack
(Use a correct AC adapter
for your local voltage and
receptacle type.)
Содержание HT-120
Страница 1: ...1WMPD4002673 ...