
Weighing procedures
Weighing procedures
Weighing procedures
Weighing procedures
1. Turn on / off the scale
1. Turn on / off the scale
1. Turn on / off the scale
1. Turn on / off the scale
Press
the
ON:OFF
key to turn on the scale. The scale displays all segments for a few
seconds and then displays zero.
Press
the
ON:OFF
key again to turn the scale off.
2. Select the weighing unit
2. Select the weighing unit
2. Select the weighing unit
2. Select the weighing unit
Press
the
UNITS
key to select a weighing unit from “g”, “oz”, ct (HL-200i only) , “lb-oz”
(HL-2000i only) or “tl”. Normally the scale displays “g” when is shipped from the factory.
To turn on with other units
, turn the scale off. Press and hold the
UNITS
key, then press
the
ON:OFF
key. The scale will start with the next unit.
3. Weighing
3. Weighing
3. Weighing
3. Weighing
Verify the reading is zero. If not, press the
RE-ZERO
key to zero the display.
If you use a container for weighing, place an empty container on the weighing pan and
press the
RE-ZERO
key to zero the display.
Place the objects to be weighed on the pan or in the container. When the reading
becomes stable, the STABLE indicator
£
is displayed.
Note
Note
Note
Note
Automatic power
Automatic power
Automatic power
Automatic power-
-
-
-off funct
off funct
off funct
off function
ion
ion
ion
If the scale is left ON and the STABLE indicator
£
is displayed, the automatic power-off
function turns the scale off after approximately 5 minutes.
To disable or enable this function, press the
ON:OFF
key while pressing the
RE-ZERO
key. When the scale is turned on,
XXX
(XXX = 1.00 etc.) is displayed and this
function is disabled. If
XXX
is not displayed, then the function is enabled.
Error message
Error message
Error message
Error message
a
Overload. Remove the objects from the pan.
a
Low battery. Replace the batteries with new ones.
Calibration
Calibration
Calibration
Calibration
For information about calibration, please visit the A&D website (http://www.aandd.co.jp/).
g
oz
ct
tl
g
oz
lb-oz
tl
HL-2000
i
HL-200
i
“tl” = Taiwan tael
3-23-14 Higashi-Ikebukuro, Toshima-ku, Tokyo 170-0013 JAPAN
Telephone: [81] (3) 5391-6132 Fax: [81] (3) 5391-6148
WM+PD4000944