17
6.5.
Setting Center Value and Tolerance Range
This explanation uses
(5-stage comparison), specifies
(Center
value using numerical input) or
(Center value using sample weight input) to
(input method) in the function table, and compares using the center value and
numerical input of tolerance range.
Selecting a input method
(If
or )
Step 1 Press and hold the SAMPLE key to enter the function table.
is displayed.
Step 2 Press the SAMPLE key several times to display
(comparator threshold
value).
Step 3 Press the PRINT key to display
(comparator threshold value).
Step 4 Press the SAMPLE key several times to display "
Center value using numerical input
" or
"
Center value using sample weight
". Specify the center value, tolerance range and second
tolerance range.
Numerical input of center value
(If
)
Step 5 Press the PRINT key while displaying
. The current parameter is displayed (all
digits blinking). If parameter does not need to be changed, press the PRINT key or CAL
key and proceed to step 6. If the parameter is to be changed, press the RE-ZERO key and
change it using the following keys.
SAMPLE key
Moves blinking digit.
RE-ZERO key
Changes value of blinking digit.
MODE key
Changes polarity.
PRINT key
Stores and proceeds to step 6.
CAL key
Cancels and proceeds to step 6.
Step 6 Proceed
to
"
Storing tolerance range from center value using numerical input
".
Storing center value using sample weight
(If
)
Step 7 Press the PRINT key while displaying
. The current parameter is displayed (all
digits blinks). Press the RE-ZERO key to enter to the sample weight input mode. Press
the RE-ZERO key to display 0.00 g . Put sample of center value on the pan and press
the PRINT key. The current parameter can be confirmed (all digits blinking). Press the
PRINT key to store the center value.
Step 8 Next,
is displayed.
Step 9 Proceed
to
"
Storing tolerance range from center value using numerical input
".
